Site Updates:

Here is where i will Post updates with the Company, and Current Shop Cars. Customers can also have their rides showcased.

6/4/11 - Another Monthly Update. Things have been progressing rather slowly. but we've started to collect some work. i've added a co-owner to the buisness and now have added working on piston cars. in the shop right now, we've got a LS block that were getting ready to tear down. Now i know what your thinkin. "Honda??? WTF!?!?" but even the honda guys deserve some love. and since the new co-owner used to be a huge Honda Advocate. so hard to turn them away now. Both the Coupe and the Vert are still in their current status, Coupe = Needs new motor, Vert = Needs upper half re-assembled. Just waiting on Funds to clear up. News on the KA-T, its getting the Turbo side reassembled following blowing a turbo. Hope to have more indepth news soon. Thanks for the support guys!

5/17/11 - Wow, been over a month and my how times have changed. Recently picked up a New Shop car!!! 1988 Mazda FC3C Vert. Red, 108k Original!!! gonna change directions once again! and Tod the TII motor into the Vert and Build a Nasty Bridge Port for the Coupe!! 6PP is gonna start pickin up soon. we've had a couple requests for work. and it sounds like 6PP will also team up with another shop to start working on Nissan's as well. Updates for the involvment of "STK," since its been disbanded by its creators 6PP is once again looking for Local Talent in SCCA, NASA, Drift and Time Attack. Always remember guys, If it ain't got no rotor? IT AIN'T NO REAL MOTOR!!! No Pistons 4 Life.

4/13/11 - New Updates, still working out Business Deals with Andrew, and also looking to add support to a local Race/Show Team emerging. Team "STK" as they are known will hopfully become a goo investment for this shop. Also the TII build is going good, found possible damage to the Rear Rotor so new rotors need to possibly be sourced. After thinking about the Drive-a-bility of a Bridge Port, this motor will possibly become a Large Street Port, or if i feel ambishious, Still a Bridge Port. Stay Tuned for more updates! New Pictures have been posted to the Engine Build, and Company Car 89 GTUs. Check em out!! also working on a "comments" or Blog type page so people can post up and say hi!

3/10/11 - Good Updates this week! Aquired a TII Engine Complete for 400.00. Plans for this engine are to swap them into the Shop Car and make 200 - 250 RWHP Reliably as a Daily Driver. Original plans are to keep the Top mount intercooler, but could change as money and parts progress. also planning on a Street Port to keep it reliable smooth for light to light traffic. Also in the Updates we are Moving to Tucson! hope to aquire an actual shop location so that we can progress much faster. Also planning on picking up a buisness partner to help expand my Customer base. he's very interested in the Nissan side of Performance and is currently building His KA-T in his 180SX (240sx). Thanks for your support. working on getting a blog/comment bar onto the site so i can have direct customer feedback.

2/19/11 - Today was the Arizona Mazda Club Dyno Day. Hosted by UMS Tuning. Dyno'd the N/A Large Street Ported FC3S Today. Using a Dynapak Dyno the Rx7 put down a meisly 115 RWHP and 113 RWTQ. AFR's were in the 11:1 - 12:1 range. way too rich for a Normally Aspirated set-up. So i'm gonna pull fuel out, and drive around until the New Motor is made. BridgePorted 13b-T.... Stay Tuned!

1/24/11 - First Update for this new site, welcome all customers. Shop car has had no recent work performed, waiting on a Serial Cable to connect the Rtek ECU to the Laptop so we can begin tuning.